XingBang ball mill finish qualitative leap at will do
XingBang ball mill finish qualitative leap at will dolarge ball Which, The Zhengzhou Xingbang machine an ideal choice for!Large ball commonly used bearings, its maintenance is an extremely important regular work, it should closely cooperate with the operation and maintenance, there should be full-time staff on duty to check. 1. Installation and commissioning: a large ball mill equipment should be installed on a level concrete foundation with anchor bolts fixed.Jaw cusher
2, the installation should pay attention to the main body vertical and horizontal. After installation to check all parts of loose bolts and host Kurakado, of fastening, if to be tightened. 4, according to the power of the device to configure the power cord and control switch.rotary kiln Checked for empty load test, test normal to the production. 2.Maintenance of the large ball mill: a large ball bearing shoulder all the load of the machine,Rotary dryer so good lubrication of the bearing life has a great relationship, it directly affects the life of the machine and operating rates, and thus the requirement to inject the lubricant must be clean, sealed must be good, the machine oiling at: (1) Turn the bearing (2) roller bearing (3) Gear (4) activities bearing sliding surface. 2, the newly installed tire prone to loosening must always be checked.
3, the attention of machine parts working properly. 4,block machine pay attention to check the degree of wear of the wear parts, and pay attention to the replacement of worn parts. 5,Cone Crusher put the base of the plane of the active device, activities bearing out dust and other objects, in case the encounter can not be broken material in the bottom shelf mobile, resulting in a serious accident. 6, bearing temperature rise should be immediately stopped to check the reason to eliminate them. 7, when the gears in operation, if the impact of sound should be immediately stopped to check and eliminate. Ball mill technology compared with international standards, there is a certain gap between Zhengzhou prosperous country is trying to build the entire mill production line, equipment and technology upgrades, perfect!