Hongxing

When you try to clean a manually cleaning magnet, you can simply put a drop cloth or tarp under the magnet and switch the magnet off. Automatically cleaning magnets are designed with a hydraulic or electric motor driven heavy duty rubber belt that constantly rotates to discharge any tramp metal attracted to the magnet face.

Henan Hongxing magnetic pulleys are often used to replace standard pulleys in conveyor applications. Addition of the magnetic circuit to the pulley adds protection against tramp metal at a minimal cost. Magnetic pulleys are a very effective means of separation as all of the product passes over the pulley at the end of the conveyor and they continuously clean as the return side of the belt leaves the pulley.

Hongxing is the industry leader in drum separators! We offer exceptional craftsmanship and quality at a lower price. Our drum separators work on the principle of a stationary magnet under a rotating drum and are fully adjustable for the magnet start and stop position. Drum separation is an excellent solution to high volume separation where vertical space is available. Any number of feed options can be implemented to allow for feed adjustment.

To clean manually clean drawer in housings, simply unlatch and remove the drawer and wipe the tubes with a rag or gloved hand. Easy clean models are cleaned manually, simply by unlatching and pulling a handle. The easy clean model is a good compromise between manually cleaning and automatically cleaning. Auto clean drawer in housings can be cleaned by the push of a button or cycled via a timer that is controlled by the system controller or separate timer relay. As the professional manufacturer of complete sets of mining machinery, such as jaw breakers, Henan Hongxing is always doing the best in products and service. dryer machine:http://www.hx-crusher.com/
ore beneficiation:http://www.hx-crusher.com/ore_beneficiation.html

Common uses for drawer in housings are for sugar, plastic pellets, carbon black, shot, and many other free flowing products. Location should be considered when deciding on a cleaning method.

Chute separators are constructed of housing with plate magnets on both sides that hinge or slide out. If the chute dimensions are too large for the tramp metal to be removed by just the outside plates, a wedge with plate magnets under it is added at the center of the chute to force all of the product to pass through the magnetic field.

To manually clean chute separators, simply unlatch and swing open or slide out the plate magnets to wipe them off. Chute separators are also available with stripper plates to facilitate easier cleaning.

The Magnetic Separator can separate raw materials with different magnetic rigidities. The machine works under the magnetic force and machine force. The Wet Magnetic Separator can separate raw materials with different magnetic rigidities. The machine works under the magnetic force and machine force. Magnetic Separators are designed to recover ferromagnetic materials.

A magnetic separator, dry magnetic separation, ore separator, permanent magnetic separator is in the mineral processing equipment, machinery and equipment in the central part. With the market pick up this quarter, the overall machinery industry, the field of mineral processing equipment market becomes active, and promotes the prosperity of the surrounding raw material supply industry.

Magnetic separator, dry magnetic separation machine, good bad users first and foremost consideration of the quality issues, user acceptance and demand for a direct impact on the development of the industry. In addition, magnetic separator, power consumption is huge, so its power-saving features will receive widespread attention. To this end, mechanical forecast in the next two quarters, magnetic separator on the market leading products will be energy efficient magnetic separator and its energy-saving products reducer. In addition, because the old-fashioned magnetic separator to change the maintenance requirements, so the second quarter of the liner and the ball will continue to rise, and gradually stabilize in the third quarter. As the professional manufacturer of complete sets of mining machinery, such as sand washing plant, Henan Hongxing is always doing the best in products and service. sand maker:http://www.hxjqchina.com/product-list_57.html
ball mill:http://www.hxjqchina.com/product-list_34.html

Due to the recent State attaches great importance to the reasonable application of environmental protection and energy, will lead to equipment buyers to pay more attention to the production of the magnetic separator is suddenly on the development of the principle of efficient use. It is reported that there will be more process improvements are applied on a magnetic separator. Therefore, the separator market will continue to slow growth rate of a quarter, the effective increase in the middle of the year. In a large part of the increase in multi-replacement products in the various mines. Enhance the overall performance of the magnetic separator and new pharmaceutical development and give the market considerable profit margins.

Due to the recent iron ore prices continued to raise, the various mines the efficiency of magnetic separation of the new requirements. The application of dry magnetic separation machine so old-fashioned magnetic separator market share has been gradually shrinking, high gradient magnetic separator and saving water resources has been further strengthened. Can see a clear trend is in the coming month. All equipment buyers interested in new products will be greatly stimulated and strengthened.

Factors affecting the magnetic separation process

Magnetic effect of many factors, impact crusher in India the magnetic separator is the following:

1) Magnetic separator cylinder rotation;

2) Magnetic system angle;

3) Work space (ie, jaw crusher in India Park tube and the bottom of the gap);

4) Pai concentrates at the gap.

The size of the number of revolutions of the magnetic separator effect

Generally speaking, cone crusher in India the small diameter of the magnetic separator using high number of revolutions, e.g. Φ600 mm diameter with 40 rev / min, the diameter of the low number of revolutions, such as Φ750 mm diameter 35 turn / sub.

The size of the separator speed processing power. Have a certain impact on the quality of concentrate. Rpm high magnetic separators in operation, due to faster magnetic smaller with the living body and gangue up opportunities, and only those magnetic high mineral particles may sorting up, and thus the quality of concentrate higher. Contrary rotation is relatively slow; due to the magnetic induction effect of the magnetic weaker mineral particles also have the opportunity of sorting up, resulting in the quality of concentrate affected. Therefore must be based on the ore characteristics, specifications, select a suitable magnetic separator rpm. As the professional manufacturer of complete sets of mining machinery, such as ore beneficiation, Henan Hongxing is always doing the best in products and service. hammer crusher:http://www.hx-crusher.com/hammer_crusher.html
ball mill:http://www.hxjq-crusher.com/20.html

The magnetic declination size of the magnetic effect

Production by the State, magnetic separator, magnetic declination by the shaft of the transmission side of the head is equipped with indicating device, move the adjusting nut can be adjusted to the size of the declination of the magnetic system.

Magnetic declination angle is too small is not good, too small affect the quality of concentrate, so that the magnetic properties of small particles have the opportunity to sorting up, but the tailings grade will reduce the recovery rate is good; the angle is too large, have the opportunity to choose up to improve the quality of concentrate is good, because only the magnetic particles, magnetic there is no chance to come up into the tailings, the tailings grade increased, lower recoveries.

Therefore, the magnetic declination size is the number of appropriate must be based on operational requirements to adjust the general production field magnetic declination adjustment around 15 ° -20 °. Adjusted the angle of the magnetic system in production, if the operating conditions and requirements did yo change, Do not just move.