hxmining

The construction of water conservancy, housing, roads, railways and other facilities have been increasing demand for high-quality aggregate. Thanks to strong market demand for sand and gravel production line has become a hot investment.

As an artificial sand (natural sand) washing equipment, sand washer is used for removing dust in sand. It aims at improving the quality of sand. It is especially applicable to wash construction sand and paving sand. Sand washing machine is widely used for cleaning materials in the following industries: quarry, minerals, building materials, transportation, chemical industry, water onservation and hydropower, cement mixture station and so on. Clean aggregate to improve the quality of the concrete, engineering and construction companies favor the object. Clean gravel material on the market price is relatively high.

Hongxing Mining Machinery XS series high-efficient sand washer is researched and manufactured combining the actual condition of the sand and stone industry in our country and adopting advanced technology. This series of sand washer is high in washing ratio, and reasonable in the structural design, and high in processing amount. During the sand washing process, there is only a small amount of sand that is washed away. The driving part of the sand washer is isolated with water and sand, for this reason, the breakdown rate of this equipment is much lower than the frequently-used sand washer and it leads the sand washer equipment in the sand washing technology at home and abroad.

Sand washer is mainly used in building site, gravel plant, concrete dam building site of hydropower station, etc.Feed material is normally delivered between two to four feet from the feed end of the box and is subjected to an aggressive washing action resulting from the intermeshing paddle design. The paddles perform two functions: they help convey material and are the catalyst to material on material scrubbing. The clean material works uphill, between the shafts, and is discharged out the bottom of the box. Deleterious materials are absorbed into water and carried over a weir on either side of the box. The length of the washer box is dependent upon the percentage and tenacity of clay or the waste to remove. flotation cells:http://www.hxjq-mill.com/products/flotation_machine.html
ore separating line:http://www.hxjqchina.com/n28.html

Features of spiral sand washer

Spiral sand washer has the features of reasonable structure, high capacity, low power consumption, and easy to maintenance. The novel seal structure, fully enclosed gearing and adjustable overflow weir can ensure the characteristics of high efficiency, long service life, good dehydration effect and stable fine-grained products.

1, spiral sand washer uses spiral to push stones and made the stones set apart from water and dirt. So it has high cleanliness but low capacity.

2, drum sand washer made the stones collide with each other in the rolling drum, and spray-wash them by water cannons. So it demands large amount of water. But the output is also large.

3, the wheel sand washer is a new washing equipment in recent years, which can wash both sand and stone. It has a wide range of use and high social demand.

4, vibrating sand washer is the professional washing equipment for large-sized stones. It has high capacity and low water consumption.

5, bucket-type sand washer is a stone washing equipment evolved from the underwater digging part of dredging ship. It has reasonable structure, high capacity and easy to assembly. Water -saving is significant.

Henan Hongxing a prominent mining machinery manufacturer in China,such as mobile crushing station, we provide you with quality mineral processing plant and machinery at an excellent price.

After the installation of the sand making machine, it will be applied in the production. The new sand making machine has the characteristics of large output, low energy consumption, which also can fully meet your needs within plan date. However, if you want the sand making machine serve you better, you should be better maintain the equipments. Although the machine is not live, they still need maintain as you need to eat when you are hungry and you need have a rest when you are tired. Here we list five taboos in the operation of a sand making machine to avoid you the duplication of efforts.

1, do not operate the machine without reading the instructions

After you purchase and receive the equipment you should carefully read the related use illustrative material of the sand making machine to familiar with the use and maintenance status of the sand making machine. Do not operate the machine without skilled understanding of the machine, in case to lead unnecessary accidents.

2, do not use unqualified power

Do not use unqualified power, not put electrode not well roasting. Pay attention to the electrode quality when slipping the electrode and a few minutes after slipping the electrode. Do not move electrodes the motor as soon as possible and adopt various measures to prevent electrode soft-off. Treat it immediately once there is a soft off. jaw crusher:http://www.hx-china.com/1.html
sand maker:http://www.hxjq-crusher.com/58.html

3, do not operate the machine with stuffs in the machine

Before start a sand making machine, you should examine whether there is mineral or iron block in the machine. Sand making machine does not permit working under loads, which will probably cause electrical trip or damaging parts of the machine, so make sure whether there is ore or other materials in the machine, if so, remove them before starting.

This sand production line has features of high automation, low operating costs, high crushing ratio, low energy consumption, large output, convenient maintenance, uniform granularity and good shape of the products, reasonable gradation, and the produced sand conforms to the national standard of construction sand.

Tips on Safe Operation:

During operation, keep watch over all the meters in order to make sure that they are in normal operation and there exists no abnormal sound in all the components.

The interlocking devices of the crusher cannot be removed in any case.

Keep far away from the jaw crusher while it is in operation.

Anyone should not touch the large ores or rocks in the machine with hands while the machine is in operation.

As the professional manufacturer of complete sets of mining machinery, such as ball mill, Henan Hongxing is always doing the best in products and service.

Hongxing Mining machinery supplies washing and crushing equipment for iron ore, with additional free advise of building iron ore crushing plant. Washing equipment for artificial sand and stone is our sand washing machine, which is recommended strongly by our experts. And crushing equipment are our jaw crusher and impact crusher as well as our cone crusher. Jaw crusher is our feast product and star product of impact crusher which both have two type:European type jaw crusher and P series crusher. European type jaw or impact crusher are based on our engineer’s many years’ experience and improvement as well as absorbing European advanced technology. P series jaw or impact crusher are our local and feast product, which are of high performance with comprehensive lower price.

The sand washing machine is widely used in the construction site, sand stone factory, the construction site of concrete dam of a hydropower station, concrete pre-cast parts factory, oil-well refilling and other industries. The original sealed structure and the reliable transmission device ensure the good dewatering effect after washing. Therefore, it’s an efficient sand washing equipment used together with the sand making machine. This series washing machine is arranged with a slant angle of 15°. The section under the water sink is surrounded by three weir plates, forming a sedimentation tank. The spiral head part is merged in the sedimentation tank, and it rotates continuously due to the motor driven by the speed reducer, and is supplied with washing water by the perforated plates at the bottom of the sedimentation tank. This equipment has three functions as washing, dewatering and classifying. sand washer supplier:http://www.hxjqchina.com/product-list_29.html
classifier:http://www.hx-crusher.com/classifier.html

According to its appearing name, sand making machine is an equipment (often machine made and manufactured by workers) that make sand from other material such as stone, rock, aggregate, granite,quarry,etc for construction and building industry.

According to its working function, it can be divided into vsi sand making machine and Pcl sand making machine. PCL is the traditional direct shaft working manner sand maker, while vsi is the vertical shaft impact sand making machine. So vsi is more efficient than pcl as well as on the reshaping of rock.

Highlights of vsi vertical shaft impact crusher/sand making machine:

1.After optimized design,the deep-chamber rotor can make the capacity increased by 30%.

2.Surrounding plate is inversable,to improve the material’s utilization and increase more than 48% of the lifespan.

3.Combined hammer design,only need to replace the wearing part,can reduce the operation cost by over 30%.And the use of vice hammer can prevent damage to the vertical plate after the main hammer worn.

As the professional manufacturer of complete sets of mining machinery, such as vibrating screen, Henan Hongxing is always doing the best in products and service.

Hongxing Mining machinery supplies washing and crushing equipment for iron ore, with additional free advise of building iron ore crushing plant. Washing equipment for artificial sand and stone is our sand washing machine, which is recommended strongly by our experts. And crushing equipment are our jaw crusher and impact crusher as well as our cone crusher. Jaw crusher is our feast product and star product of impact crusher which both have two type:European type jaw crusher and P series crusher. European type jaw or impact crusher are based on our engineer’s many years’ experience and improvement as well as absorbing European advanced technology. P series jaw or impact crusher are our local and feast product, which are of high performance with comprehensive lower price.

The sand washing machine is widely used in the construction site, sand stone factory, the construction site of concrete dam of a hydropower station, concrete pre-cast parts factory, oil-well refilling and other industries. The original sealed structure and the reliable transmission device ensure the good dewatering effect after washing. Therefore, it’s an efficient sand washing equipment used together with the sand making machine. This series washing machine is arranged with a slant angle of 15°. The section under the water sink is surrounded by three weir plates, forming a sedimentation tank. The spiral head part is merged in the sedimentation tank, and it rotates continuously due to the motor driven by the speed reducer, and is supplied with washing water by the perforated plates at the bottom of the sedimentation tank. This equipment has three functions as washing, dewatering and classifying. sand washer supplier:http://www.hxjqchina.com/product-list_29.html
classifier:http://www.hx-crusher.com/classifier.html

According to its appearing name, sand making machine is an equipment (often machine made and manufactured by workers) that make sand from other material such as stone, rock, aggregate, granite,quarry,etc for construction and building industry.

According to its working function, it can be divided into vsi sand making machine and Pcl sand making machine. PCL is the traditional direct shaft working manner sand maker, while vsi is the vertical shaft impact sand making machine. So vsi is more efficient than pcl as well as on the reshaping of rock.

Highlights of vsi vertical shaft impact crusher/sand making machine:

1.After optimized design,the deep-chamber rotor can make the capacity increased by 30%.

2.Surrounding plate is inversable,to improve the material’s utilization and increase more than 48% of the lifespan.

3.Combined hammer design,only need to replace the wearing part,can reduce the operation cost by over 30%.And the use of vice hammer can prevent damage to the vertical plate after the main hammer worn.

As the professional manufacturer of complete sets of mining machinery, such as vibrating screen, Henan Hongxing is always doing the best in products and service.

The maintenance is very important to the sand maker. Long -term use will bring wear and tear to the machine, so we must regularly check the degree of wear and do the regular maintenance. Maintenance the machine and make it play a greater role. About how to maintain the sand machine method still has a lot of, I'm here to offer you this article a few carefully chosen, and I hope to help. Of course everyone in the use of the method of sand machine to regulate, strengthen the maintenance, such ability prolong service life of sand machine.

First on the sand machine start must be checked before moving cavity observation door whether vortex securing, in order to prevent the material from vortex move cavity observation rushed out of the door, produce risk. Also check the impeller rotation direction, from enters the material mouth directions. Impeller should counterclockwise rotation, or should be adjusted motor connection. Using the high performance impeller is also essential. In order to increase the service life of equipment, zhengzhou branch mining equipment Co., LTD. Has sails the successful development of the use of high manganese steel structure, improve the eddy current rotating way, launch speed can be self-adaptive new impeller device. The process efficiency can achieve common system of sand machine 1.2 1.5 times, due to the high wear-resisting structure and optimizing the up and down after lining board, can be effective in improving the sand machine the service life of equipment, for users save money and recycling costs. The sand conveying equipment and machines startup sequence of has certain standard requirement, must be the first after discharging of sand and then there's the feeding machine; In the sand machine must be made no-load start, wait until the sand machine on normal rear can give material. Stop order and boot opposite in order.And enters the material particle strictly according to regulations, banned materials into the system than provisions sand machine equipment, otherwise, can cause the impeller's imbalance and the impeller excessive wear, and to cause jams impeller channel and center into the feed tube, make the sand machine equipment can not work normally, which had found large enters the material should be promptly eliminate. Discharging equipment stop action, should be timely stop feeding, otherwise, can cause killed impeller and burned motor. The feeding strive to continuously even. The sand during the running machine equipment, and may not have severe vibration and abnormal noise, otherwise, should stop for inspection. aggregate jaw crusher:http://www.hx-china.com/6.html
china cement mills:http://www.crusher-machine.com/23.html

Professional Sand Making Machine Manufacturer- Hongxing Machinery has been the most advanced sand maker manufacturer in mining and construction industry in China. It is a major production and export base of sand-stone and powder making machinery in China. Boasts its 90000 square meters production base and owns complete modernized metal cutting equipment, equipped with advanced Solidworks 3D mechanical design and Computerized Simulation Test System, Hongxing has cultivated a professional technology and after-sales service team, and successfully achieved ISO9001:2000 Quality Management Certificate and EU CE Certificate.

As the professional manufacturer of complete sets of mining machinery, such as rock crushers, Henan Hongxing is always doing the best in products and service.

Artifical sand is particularly suitable for the preparation of high strength concrete, high-performance concrete and pumping concrete. However, the artificial sand is not easy to be made, the raw material need to be crushed at first, and then second crushed maker, the coarse crushed sand is cleaned by high efficiency sand washer. The standard final fine sand will be used in construction and other places. The artificial sand making machine components are of high strength design to accept high power draw. Manganese steel is used for this artificial sand making machine. The basic concept behind the PCL sand making machine is the same as it did during its inception, but the machine is entirely updated to address todays advanced technology, safety concerns, and operation schedule.The article is provided by Hongxing company,As the professional manufacturer of complete sets of mining machineryRaw material mill, Henan Hongxing is always doing the best in products and service.

The sand making process designed by our company can provide customers with considerate technical support. The whole production line is composed of jaw crusher, vibrating feeder, vibrating screen, belt conveyor and so forth. Sometimes, in order to satisfy various customers’ requirements, different models of equipment can be combined together for use.

The general sand making process is as follows: The raw materials are first fed into the jaw crusher for primary crushing. Then after primary crushing, the materials will be transferred to the secondary crusher through the belt conveyor. After this process, the crushed materials have to go through the vibrating screen for sieving. The final products that meet the required particle size will be conveyed to the sand making machine, while the rest will return to the secondary crushing machine for repeated crushing. The sand making process will be indeed completed after the finished products’ being washed in the sand washing machine. ball mills:http://www.hxjq-crusher.com/20.html
sand maker:http://www.hxjqchina.com/product-list_57.html
ore beneficiation:http://www.hx-china.com/36.html

High strength pumping concrete made by artificial sand will not block the pump in the process of pumping. The concrete of right use of artificial sand has large density, impermeability, good freezing-resisting property, other physical properties and long-term durability can use to meet the design requirement too.

Larger than 40mm Sand making process：In the other artificial sand producing process, large stone( input size is larger than 40mm) is transported to crusher via vibrate feeder for primary crushing. Then the crushed materials are screened out into several different types with a vibrate screen.

The stone with satisfied size is transported to sand washing machine, while the rest will be back into crusher for breaking again. When through the role of sand producing machine, the final products – artificial sand is formed. After washing in sand washers, the pure sand meeting your requirement is produced.

Artificial sand or manufactured sand substitute for river sand, from stones or rocks. Hongxing Sand making equipments are of high efficiency and high performance crusher, low in maintenance and operating cost. The final artifical sand is cubic with grounded edges and is used for making concrete with building aggregates.

Hongxing has hit upon the idea of designing artificial sand making process according to the two grades of artificial sands – 1-3 mm for plastering and 3-5 mm for all construction work. As these artificial sands would be double-washed and silt-free, it would bond better with concrete and would require lesser curing time than river sand.

As the professional manufacturer of complete sets of mining machinery, such as rotary kiln, Henan Hongxing is always doing the best in products and service.

General process flow of sand stone production line is that: the materials come through the primary crusher to be coarse crushed. According to the hardness and yield of stone, the secondary crusher can be selected. At last, the materials are processed by sand making machine until the materials become ideal stone particles. The wet sand making machine also asks to be equipped with sand washing which can wash and clean the sand materials. At last the building application sand stone materials can be got and features with cleaning and high quality. The user can process the materials according to the actual conditions.

The general equipments in sand and stone production line are jaw crusher, impact crusher, cone crusher, sand making machine and belt conveyor. Zhengzhou Hongxing Machine produces crushers. Selecting crushing and sieving equipments can bring higher interests for you.

We provide customers with complete equipment employed in stone crushing plant, together with vibrating feeder, jaw crusher, impact crusher, vibrating screen, belt conveyor, and centralized electrical management. Dedusting equipment is on the market upon request. numerous models of the higher than machines is combined in line with customers' specific method demand.

Our stone crushing plant is appropriate for crushing a range of materials, like limestone, granite, basalt, river pebble, etc. Currently it's widely employed in hydroelectric power, building materials, highways, urban construction, and different industries.

Process Flow of Our Stone Crushing Plant

General natural stones is big, it is not suitable for construction building. So we must crush these stones into small size or change the form of it in stone crushing plant. Stone crushers is the machine that is used to reduce the size, or change the form of waste materials so they can be more easily disposed of or recycled, or to reduce the size of a solid mix of raw materials (as in rock ore), so that pieces of different composition can be differentiated. Usually we crush stones into 10mm, 12mm, 19mm, 25mm, 50mm, 100mm.Large stone materials are evenly fed into the jaw crusher by vibrating feeder for primary crushing, once that the materials are conveyed to the impact crusher by belt conveyor for any crushing. Then, the crushed materials are conveyed to the vibrating screen for screening and grading. The particles that meet the required size demand are sent to the finished product stockpile, and people do not satisfy the dimensions demand are sent to the impact crusher to be crushed once more. This aggregate processing plant will continue until the final particles satisfy the size requirement. dryer machine:http://www.hx-china.com/15.html
ball mills:http://www.hx-china.com/14.html
ore beneficiation:http://www.hx-china.com/36.html

The main machinery is in nude packing and spares parts are packed in wooden or steel box. The standard export packing is suitable for long distance delivery. Engaging in processing equipment industry for decades, Henan Hongxing Mining Machinery Co., Ltd sums up many precious experience. And mineral processing equipment is also unconventional or unorthodox, steady updated, our country always stand leading position in the industry of mineral processing equipment.

According to the difference between feeding opener and output sizes, they are usually separated: primary stone crusher, secondary stone crusher (medium crusher) and fine stone crusher. Hongxing stone crusher can used as slag crusher, quartz crusher, lime stone crusher, granite crusher, iron ore crusher, marble crusher and so on.

As the professional manufacturer of complete sets of mining machinery, such as jaw crusher, Henan Hongxing is always doing the best in products and service.

Nowadays, rod mill is the most effective crushing machine and its performance has achieved the international standard. It is widely applied in the gravel industry. And it is mainly used for processing or crushing the feldspar, quartz, minerals and other raw materials, and it is also suitable for finely or secondarily crushing the various tough or brittle materials, such as grinding material, refractory material, cement, steel shot, pulverized slag, copper ore, iron ore, gold ore, concrete aggregate, bituminized aggregate. Now it is a most advanced high-efficient low consumption sand-maker in the world. Rod mill has two types to choose from ,the dry type and the wet type.Our company adopts advanced controllable material technology, combined with appropriate grinding media that is coordinate with the actual grinding materials,changed the traditional surface contact to line contact, thus to make the particles more uniformly,and the output higher.

The product is very similar to ball mills, except they use long rods for grinding media. The rods grind the ore by tumbling within the the mill, similar to the grinding balls in a ball mill. To prevent the conditions leading to rod charge tangling, the length to diameter ratio is maintained at 1.4 to 1.6. The equipment accepts feed up to about 50 mm (2 in.) and produce a product in the size range of 3000 to 270 mm (–4 to –35 mesh). Grinding action is by line contact between the rods extending the length of the mill. Rods tumble and spin in roughly parallel alignment simulating a series of roll crushers. This results in preferential grinding of coarse material and minimizes production of slimes.

The machine normally carries 35 to 65% rod charge by volume. The limits on charge level are (1) keeping the feed end trunnion open so that feed will get into the mill, and (2) keeping the rod charge low so rods will not work their way into discharge openings where they can cause rod tangling. The Critical Speed is used for the determination of ball mill ideal operating speed. But for comparison, rod mills would operate between 50% to 95% of the critical speed. The faster the mill speed, the greater the wear on the rods and liners. So, the general rule of thumb for rod mills is to operate no faster than the speed that will obtain the desired product size.

Working Principles:

The motor drives the rod mill through the reducer and peripheral big gear ,or the low-speed synchronous motor directly drives the rod mill through big gear around rod milling machine to drive the cylinder body rotation.The cylinder body is filled with appropriate grinding medium - steel bar. In the function of centrifugal force and friction force,the grinding medium was promoted to a certain height,and then was thrown or relief in fall state.The materials to be grind were continuously send into the cylinder,and shattered by the moving grinding medium inside,Then,through the overflow and continuous feed strength, the materials will be discharged ,so that to begin next segment procedures.

Features and Benefits：

1. Higher capability and more even discharging size. Adopted advanced technology of sand maker-rod mill by controlling the input or output materials; related to the user’s actual grinding materials, choosing an appropriate grinding medium, replaced the traditional surface contact to the linear contact . Therefore, its discharging size is more even, the capability is higher, suitable for various hardness of ore.( Moths hardness 5.5-12).

2. Adjustable fineness of limestone. Through simple adjustment, will change the discharging size ,and inside , has finesse control device and screening device, ensuring not over grinding and avoiding the unqualified product interfusing into end products.

Small Tips When Using the Machine:

According to the actual situation, the user can choose the dry or wet method of the sand maker-rod mill. As to the materials which contain the ferrum, like quartz sand, dolomite and monazite, the user can add a magnetic separator to finish the processing of de-ironing.

As the professional manufacturer of complete sets of mining machinery, such as rotary kiln, Henan Hongxing is always doing the best in products and service. hammer crusher:http://www.hx-china.com/2.html
impact crusher:http://www.hxjqchina.com/product-list_12.html
raymond mill:http://www.hxjqchina.com/product-list_22.html

Sand Washing Machines are a kind of water washing style equipment to be matched with the sand making machine and can reduce the dust and stone powder which

mixes with the final sand, Its novel seal structure, the reliable transmission device, guarantees the elution water effect, is one kind of highly effective sand washer that

coordinates with sand making machine. As a widely used machine for cleaning materials in the following industries: quarry, minerals, building materials,

transportation, chemical industry, water conservation and cement mixture station and so on, it has the characteristics of high cleaning,reasonable structure,big

process load, small power loss, low loss of substances in process of washing.

Working Principle of the machine:

Sand washing machine working motor through V-belt, reducer, gear reducer driven impeller rotating slowly, sand and gravel to the trough into the wash tank,

impeller driven roll, and each other grinding,remove the cover the gravel surface impurities, the destruction of the vapor layer coated sand, in order to facilitate

dehydration; add water to form a strong water flow, timely impurities and a small proportion of foreign body away, and discharged from the wash tank overflow

export, to complete cleaning action. Clean sand from the leaves away, the final sand and gravel from the rotation of the impeller into the trough to complete the

cleaning effect of the gravel.

The Wheel Sand Washer is an indispensable piece of equipment used for sand making and natural sand washing operations. It is mainly applied in construction,

aggregate plants, glass factories, hydropower stations, concrete dams, as well as many other industries. With the advantages of small loss of sand, high level

cleaning, and high processing speed, Hongxing wheel sand washers are increasingly used for washing, classifying, dewatering of various kinds of sand. The screw

washer adopts inclination of 15 underneath the water tub, 3 weir plates form the deposit pool, the screw head is immersed in this pool, the screw is driven by

electrical motor through reducer rotating constantly, the fresh water is providing from porous plate at bottom part of deposit pool, this machine have three functions

of washing, dewatering, classifying.In many crushing plants, such as aggregates crushing screening process plant and pea gravel sand making plant, you can put in

that sand washing machine for intensive washing move.

Technical Advantages:

1.Simplity in structure

2.Easy to Repair

3.Water-saving

4.Durable

5.Pollution Free

6.Large capacity

7.Low consumption

8.Little loss of the sand during the washing process

9.Low failure rate

As the professional manufacturer of complete sets of mining machinery, such as cone crusher,ball mill,cone crusher, Henan Hongxing is always doing the best in products and service. hammer crusher:http://www.hxjq-crusher.com/66.html
raymond mill:http://www.hxjq-crusher.com/11.html
rotary kiln:http://www.crusher-machine.com/28.html

The mainframe of Hongxing sand makers adopts new techniques, which strengthens the machine structure and tenacity, and ensures stable performance. The quality of the machines is lift to a higher level. Better design of the impellers reduces the resistance of materials, highlighting passing through quantity of materials and crushing ratio, so the efficiency is raised by 30%-60% compared to traditional machines.Hydraulic system allows automatic uncovering, which reduces labor intense and makes maintenance easier.

Special light oil lubrication systems ensures the temperature to be within 25℃;Brand new automatic protection device provides the machine with vibrating, oil filtering and warning system;

New type oil flitting system ensures the bearings and other transmission system are not abraded and prolong their service time;

Choosing wearable materials prolong the service time of the machine by 40%, so the cost is lower by more than 40%.

With the increasing number of the sand making companies and the constant improvement of production environment, the requirements for the technological equipment of stone production is going higher and higher. Because of the rapid development of the industry, the exuberant sand equipment market attracted large quantities of international enterprise to enter the market in China and also promoted the technological improvement of the large-scale sand maker, crushing and screening equipment and a complete set of production lines.

In order to meet the demand of quantity and quality, make full use of resources and protect the environment, The whole set of sand making production line equipment designed and manufactured by Hongxing Machinery can be used for hard limestone, granite, basalt and smelting slag and so on and many kinds of materials more of aggregate and making artificial sand homework, suitable for water and electricity, building material, highway, urban construction and other industries. Our company can combine all types of machines according to different technical requirements in order to meet the customer's different process requirements.

Hongxing impact crusher machines adopt the design principles of long service life, low energy consumption and easy operation and reliable performance, through product and accessories optimization in order to get the highest working efficiency with the most economical form. So it has the advantages of reliable working and operational conditions, high crushing ratio, even finished products granularity, simple structure, easy maintenance, economical operational expenditure and long service life, so that it has become a hot cake.

Working Principles:

Material falls into the high-speed turning impellers from the top of machine and crushes with the material distributed around the impeller under the effect of high speed centrifugal force. After the impact with each other, the material is crushed between impeller and cabinet and is discharged from the bottom. It can cycle many times with the close circuit and the sizing device will control the granularity of finished products.

With its high quality products such as Magnetic separator、Sand washing plant、Raw material mill、Henan Hongxing mining machinery Co.Ltd has ascended in the front rank of the world in the exporting of mining equipments.