VTF Fiber Systems

VIE-0125 is a managed network switch with extendeed operating temperature range from -40℃~75℃, and has 6-port RJ45 10/100M Copper + 2 Fiber ports.

Features:

6 port 10/100M + 2 port fiber
Support port-based VLAN
Support 2 ports loop cascade transmission
Self-healing ring, recovery time < 20ms
8k MAC address
Full/Half duplex, auto negotiation, auto-MDI/MDI-X crossover
IP Multicast Filtering through IGMP Snooping, NTP, QoS
Support port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
MAC-based trunking with automatic link fail-over
EMC level 4, IP30 protection
Redundant PSU design, power down alarm

Standard

IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3x Flow control

Mechanical

Housing: Aluminum, IP30 protection
Weight: 0.8 kg
Dimension (W x H x D): 53mm x 140mm x 119.5mm
Installation: DIN-rail mounting, wall mounting

Protocols

IGMP, GMRP, GVRP, SNMP V1/V2/V3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, EtherNet/IP, Modbus/TCP, SNMP Inform, LLDP, IEEE 1588 PTP V2, IPv6, NTP Server/Client

Network Management

WEB, SNMP V1/V2/V3, Telent, RS-232 Console,STP/RSTP, Port VLAN, 802.1Q VLAN, Port Mirror, IGMP Snooping, Trunking

VTF Fiber System Co Ltd.

www.vtfcctv.com

VIE-5012 is a 4-port 10/100/1000M copper + 1-port Fiber Unmanaged Industrial Ethernet Switch.

Features:

Built-in 4 10/100/1000M Ethernet + 1 Fiber
Redundant power supply, support alarm
Auto negotiation Full/half duplex
Plug-and-play, autosensing and auto-MDI/MDI-X crossover
CRC check, optimize bandwidth
Operate at -40℃ to 75℃
DIN-rail or wall mount

Standard

IEEE802.3 for 10BaseT
IEEE802.3u for 100BaseT(x) and 100BaseFX
IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-SX/1000Base-LX
IEEE802.3x for Flow Control

Mechanical

Housing: IP30 protection, Aluminum case
Weight: 1kg
Dimension (W x H x D): 43mm x 120mm x 88.5mm

VTF Fiber System Co Ltd. : http://www.vtfcctv.com

VIE-3012 is a 2-port 10/100/1000M copper + 1-port fiber, unmanaged industrial Ethernet switch.

Features:

Built-in 2 10/100/1000M Ethernet + 1 Fiber

8k MAC address

Redundant power supply, support alarm

10/100/1000Base-Full/half duplex, Flow-control

Plug-and-play, autosensing and auto-MDI/MDI-X crossover

Link Fault Pass-Through,  power failure, port break alarm by relay output

1.125M bits buffer，Store-forward, Full-wire speed forwarding

Operate at -40℃ to 75℃

DIN-rail or wall mount

Standard

IEEE802.3 for 10BaseT

IEEE802.3u for 100BaseT(x) and 100BaseFX

IEEE 802.3ab for 1000BaseT(X)

IEEE 802.3z for 1000BaseX

IEEE802.3x for Flow Control

IEEE 802.1p for Class of Service

VTF Fiber System CO Ltd.

VIE2012 is an Unmanaged industrial Ethernet switch provides 1 RJ45 port 10/100/1000M and 1 fiber port, reach to 2km on multi-mode fiber and more than 20km on single-mode fiber.

Features:

Built-in 1 10/100/1000M Ethernet + 1 Fiber

288k packet buffer, 1k MAC address

Redundant power supply, support alarm

Auto negotiation Full/half duplex, Flow-control

Plug-and-play, autosensing and auto-MDI/MDI-X crossover

Link Fault Pass-Through,  power failure, port break alarm by relay output

Operate at -40℃ to 75℃

DIN-rail or wall mount

Standard

IEEE802.3 for 10BaseT

IEEE802.3ab for 1000Base-T

IEEE802.3 z 1000Base-SX/1000Base-LX

IEEE802.3x for Flow Control

Mechanical

Housing: IP30 protection, Aluminum case

Weight: 0.4kg

Dimension (W x H x D): 43mm x 120mm x 88.5mm

The VIE-8021 is a 6-port 10/100M copper + 2-port fiber Unmanaged  Industrial Ethernet Switch.

Port

RJ45 Ports: 6 x port 10/100Base-TX

Fiber Port: 2 x 100Base-FX

Feature:

Built-in 6 10/100M + 2 Fiber

Support Fiber Daisy-Chain Link

8k MAC address

Redundant power supply, support alarm

Auto negotiation Full/half duplex

Plug-and-play, autosensing and auto-MDI/MDI-X crossover

CRC check, optimize bandwidth

Operate at -40℃ to 75℃

DIN-rail or wall mount

Standard

IEEE802.3 for 10BaseT

IEEE802.3u for 100BaseT(x) and 100BaseFX

IEEE802.3x for Flow Control

Mechanical

Housing: IP30 protection, Aluminum case

Weight: 0.6kg

Dimension (W x H x D): 50mm x 136mm x 118mm

VTF Fiber System Ltd.

The VIE-8011 is a 7-port 10/100M + 1-port fiber Unmanaged Industrial Ethernet Switch.

Feature:

Built-in 7 10/100M + 1 Fiber

8k MAC address

Redundant power supply, support alarm

Auto negotiation Full/half duplex

Plug-and-play, autosensing and auto-MDI/MDI-X crossover

CRC check, optimize bandwidth

Operate at -40℃ to 75℃

DIN-rail or wall mount

Standard

IEEE802.3 for 10BaseT

IEEE802.3u for 100BaseT(x) and 100BaseFX

IEEE802.3x for Flow Control

Mechanical

Housing: IP30 protection, Aluminum case

Weight: 0.6kg

Dimension (W x H x D): 50mm x 136mm x 118mm

VTF Fiber System Ltd.

The VIE-2011 provides 1 10/100M copper and 1 fiber port, with redundant power supply.

Port:

Fiber Ports: 100Base-FX ports SC/ST

RJ45 Ports: 1 port 10/100M

Features:

Built-in 1 10/100M Ethernet + 1 Fiber

288k packet buffer, 1k MAC address

Redundant power supply, support alarm

Auto negotiation Full/half duplex, Flow-control

Plug-and-play, autosensing and auto-MDI/MDI-X crossover

Link Fault Pass-Through,  power failure, port break alarm by relay output

Operate at -40℃ to 75℃

DIN-rail or wall mount

Housing: IP30 protection, Aluminum case

Weight: 0.4kg

Dimension (W x H x D): 43mm x 120mm x 88.5mm

VTF Fiber System Ltd.

VTH1VM-T/R is a Miniature HDSDI Fiber Converter, supports 19.4Mb/s to 1.5Gb/s signals. Transmit over fiber up to 80km (regular model send over 20KM on single mode fiber.) Check here for more details and products for CCTV transmission, fiber and coaxial solutions.

VTF Fiber Optic Video & Data Transmitter and Receiver applitican:
Single PTZ Camera Over Fiber
Multiple PTZ Camera over fiber

Solution:
Standard PTZ equipped CCTV camera is connected to the VTF Fiber Optic Video & Data Transmitter using standard coax cable. The transmitter digitally compresses the signal for transmission across the Fiber Optical Cable.
At the Monitor Center, the receiver can receive the signal and the user can view the video image and control the camera movement using a standard Keyboard.

Notes:
1) VTF Fiber Optic Transmitter can transmit 1~64 channels video signals and data support RS485, RS232, RS422. you can choose our fiber optic products according to your needs.
2) If you just need to control the PTZ cameras, 1 channel RS485 data is ok to control upto 128 cameras by daisy chain, the detail connection information you can refer to your PTZ camera's manual.

As we all know the standard camera output level should be 1Vp-p that ensures a good image presenting on screen. And almost every camera are featured with auto gain control (AGC), that is the key to make the camera itself output the standard 1Vp-p video signal. But let us check around with different projects, we see there are still many colleagues can not get a good image on the mornitors. 80% of them lost quality or get degraded while video signal sending over transmission media (coax cable or fiber optics).

Is AGC a must for a video fiber optic converter? Let us simply check what are the world leading brands doing. GE (IFS or Fiber Option) has AGC, Comnet has AGC, NKF has AGC...Google more, we should be able to find the interesting thing out.

There are some products (Fiber optic converter) use MGC (Manual Gain Control) to adjust the signal level, but the meantime, they claim their products are "Adjustment Free"? We both know what the different is between MT and AT means for cars, don't we?

We can't avoid signal degrade occures as long or short the coaxial cable we have to use to connect camera and fiber optic transmitter, as long as the fiber optic transmitter has auto gain control (AGC), we get an easy install and adjustment free project to go.

VTF Fiber optic converters are all featureing auto gain control, just because we are strongly suggest our clients to enjoy our products.